Corrugated Armor

Home > Armored Cable > CCW > CCW Armored Instrumentation, Pairs/Triads, Overall Shield - 300V Cable
CCW Instrumentation - Overall Shield - 105°C

*Product images are for illustrative purposes only and may differ from the actual product.

CCW Instrumentation - Overall Shield - 105°C

Download Spec Sheet

CCW Instrumentation - Overall Shield - 105°C

Continuously Corrugated Welded Cable – CCW®
PVC Insulation & Jackets
Pairs & Triads – Overall Shields
105°C – 300 Volt – UL Type ITC-HL/PLTC

x

Please select all above options before adding to cart.
Construction
Category Conductor Description Bare, annealed copper conforming to ASTM B-3 and stranded in accordance with ASTM B8 (Class B)
Category Insulation Description Flame-retardant Polyvinyl Chloride (PVC), rated 105°C per UL Standard 13 & 2250 Color Code: ICEA Method 1
Shield UL Type PLTC and ITC-HL UL 13, 2250, 1569, 1309, and 1581 IEEE 383 and 1202
Inner Jacket Flame-retardant Polyvinyl Chloride (PVC) per UL Standards 13 and 2250 Low temperature performance meets ASTM D746 brittleness temperature at or below 40°C Nylon rip cord to facilitate jacket removal
Armor Impervious, continuously corrugated and welded aluminum per UL 1569 Meets grounding requirements of NEC Article 250
Overall Jacket Flame-retardant, moisture and sunlight resistant Polyvinyl Chloride (PVC) per UL Standards 13 and 2250 Low temperature performance meets ASTM D746 brittleness temperature at or below -40°C Nylon ripcord
  • For use as Power Limited Tray Cable on circuits rated 150V or less and 5 amps or less in Class 2 or Class 3 circuits in accordance with NEC Article 725
  • For use as instrumentation tray cable on circuits rated 150V or less and 5 amps or less in accordance with NEC article 727
  • Recognized for use in Class I, II, and III, Divisions 1 and 2; or Class 1, Zones 1 and 2 hazardous locations per NEC articles 501, 502, 503 and 505
  • Installed indoors and outdoors, in wet or dry locations, in a raceway, as aerial cable on a messenger, in cable trays, or for direct burial
  • Recognized for use on fixed or floating offshore petroleum facilities as recommended by American Petroleum Institute
  • UL Type PLTC and ITC-HL
  • UL 13, 2250, 1569, 1309 and 1581
  • IEEE 1202 available upon request

Questions & Answers

Ask a Question

Part Number Table

Part # Gauge Pairs Triads Nominal OD over Core Nominal OD over Armor Nominal OD Overall Material Weight (Lbs./M')
XK31601 16 1 - .260 .430 .540 141
XK41601 16 - 1 .280 .430 .540 160

Note: The data shown are approximate and subject to standard industry and manufacturer tolerances General Cable CCW® is a registered trademark of General Cable