HW120: LifeGuard™ 600V Single or Multiple Pairs - XLP, LSZH, I/S & O/S

Home > Instrumentation > HW120: LifeGuard™ 600V Single or Multiple Pairs - XLP, LSZH, I/S & O/S
HW120: LifeGuard™ 600V Single or Multiple Pairs - XLP, LSZH, I/S & O/S

*Product images are for illustrative purposes only and may differ from the actual product.

HW120: LifeGuard™ 600V Single or Multiple Pairs - XLP, LSZH, I/S & O/S

Download Spec Sheet
Houston Wire & Cable spec sheet

HW120: LifeGuard™ 600V Single or Multiple Pairs - XLP, LSZH, I/S & O/S


Please select all above options before adding to cart.
Construction
Category Conductor Description 7-strand soft bare annealed copper per ASTM B-3, Class B stranding per ASTM B-8
Category Jacket Description Sunlight-resistant and flame-retardant, Low Smoke Zero Halogen polyolefin per UL Standard 1277. A ripcord is applied longitudinally under the jacket to facilitate stripping
Category Insulation Description Cross-linked polyethylene (XLP) per UL Standard 44
Category Features Tray rated Sunlight-resistant Approved for direct burial Tinned conductors provide ease of termination and added protection in caustic environments Superior electrostatic interference protection from individual and Overall shield Very low smoke production when burned LifeGuard™ jacket produces zero halogens during fire – less toxic and corrosive LifeGuard™ jacket is environmentally safe – lead, sulfur and halogen free Highly chemical resistant Very flame retardant Burns to an ash – does not exhibit thermoplastic drip Excellent compression and impact resistance Superior tensile strength and abrasion resistance Flexible jacket with low coefficient of friction
Overall Shield Aluminum-polymer tape providing 100% coverage with a flexible 7 strand tinned copper drain wire
Category Standards UL Standard 1685 NEC Type TC per articles 336, 392, and 501.4 (b) and Class 1 circuits per NEC article 725
Category Applications LifeGuard™ jacket is highly flame-retardant, produces very small amounts of smoke when burned and contains no halogens. LifeGuard™ cable is ideal for applications where a high degree of safety and equipment protection is required. LifeGuard™ cable is UL listed as Type TC-LS and approved for installation indoors or outdoors, aerially, in conduits, ducts, cable trays and direct burial in circuits not exceeding 600 volts. It may be installed in temperatures as low as -30°C and used in NEC Class I, Division 2 hazardous locations. It is UL approved for continuous operation at 90°C in wet and dry locations, 130°C for emergency overload conditions, and 250°C for short circuit conditions.
  • LifeGuard™ jacket is highly flame-retardant, produces very small amounts of smoke when burned and contains no halogens. LifeGuard™ cable is ideal for applications where a high degree of safety and equipment protection is required. LifeGuard™ cable is UL listed as Type TC-LS and approved for installation indoors or outdoors, aerially, in conduits, ducts, cable trays and direct burial in circuits not exceeding 600 volts. It may be installed in temperatures as low as -30°C and used in NEC Class I, Division 2 hazardous locations. It is UL approved for continuous operation at 90°C in wet and dry locations, 130°C for emergency overload conditions, and 250°C for short circuit conditions.
  • UL Standard 1685
  • NEC Type TC per articles 336, 392, and 501.4 (b) and Class 1 circuits per NEC article 725

Questions & Answers

Ask a Question

Part Number Table

Part # Gauge Pairs Insulation Thickness Outside Diameter Inches Jacket Thickness Weight
HW12001601 16 1 30 0.33 60 59.000
HW12001602 16 2 30 136 60 136.000
HW12001604 16 4 30 216 60 216.000
HW12001608 16 8 30 397 60 397.000
HW12001612 16 12 30 530 60 530.000
HW12001624 16 24 30 960 60 960.000