HW220: LifeGuard™ POWER CABLE 5kV/8kV UL Type MV-105-LS, 105ºC Single Conductor, Shielded EPR Insulation #HW220

Zoom In Zoom Out Enlarge

*Product images are for illustrative purposes only and may differ from the actual product.

Download Spec Sheet

Houston Wire & Cable spec sheet

HW220: LifeGuard™ POWER CABLE 5kV/8kV UL Type MV-105-LS, 105ºC Single Conductor, Shielded EPR Insulation

Gauge

Qty

Please select all above options before adding to cart.

Construction Applications Standards Q&A

Construction
Category Conductor Description	Compressed soft annealed copper per ASTM B-3, Class B stranding per ASTM B-8, with a semi-conducting conductor shield
Category Jacket Description	Sunlight-resistant and flame-retardant, Low Smoke Zero Halogen polyolefin per UL Standard 1072 and ICEA T-33-655-1994 Section 5-4
Category Insulation Description	Ethylene propylene rubber (EPR) per ICEA S-97-682 Type III with a semi-conducting insulation shield
Category Standards	UL 1685 AEIC C5-8 Note: Some cable insulations may contain trace amounts of halogens.
Category Features	Cable tray rated on sizes 1/0 AWG and larger Sunlight-resistant Approved for direct burial Very low smoke production when burned
Overall Shield	Uncoated copper tape with a 25% overlap per ICEA S-97-682
Category Applications	LifeGuard™ Low Smoke Zero Halogen cable is for use in power circuits in chemical plants, refineries, steel mills, industrial plants, commercial buildings, utility substations and generating stations. It may be installed in open air, conduit, duct, cable tray when CT rated, or direct buried in earth, in wet and dry locations. It is highly flame retardant, produces very small amounts of smoke when burned and contains no halogens. LifeGuard™ cable is ideal for applications where a high degree of safety and equipment protection is required. It is UL approved for use at 105°C for continuous operation, 140°C for emergency overload conditions, and 250°C for short circuit conditions

LifeGuard™ Low Smoke Zero Halogen cable is for use in power circuits in chemical plants, refineries, steel mills, industrial plants, commercial buildings, utility substations and generating stations. It may be installed in open air, conduit, duct, cable tray when CT rated, or direct buried in earth, in wet and dry locations. It is highly flame retardant, produces very small amounts of smoke when burned and contains no halogens. LifeGuard™ cable is ideal for applications where a high degree of safety and equipment protection is required. It is UL approved for use at 105°C for continuous operation, 140°C for emergency overload conditions, and 250°C for short circuit conditions

Name

Question